SAI FAQ

Storage-Attached Indexing (SAI) is a highly-scalable, globally-distributed index for the Cassandra database. SAI combines:

Cassandra 5.0 is the only supported database currently.

After creating your database, a keyspace, and one or more tables, use CREATE INDEX ... USING 'sai' to define one or more SAI indexes on the table. For Cassandra databases, use cqlsh. The same CREATE INDEX ... USING 'sai' command is available for both. See SAI quickstart.

Compared with most indexing environments, SAI configuration and related settings are much simpler. Key points:

Aside from memory, SAI uses the same tunable parameters for Cassandra, such as compaction throughput and compaction executors. This matters for write performance. For read performance, again, maximizing use of the Chunk Cache will benefit SAI reads because all on-disk index components are accessed through this mechanism. Refer to Configure SAI indexes.

Oftentimes, developers ask: "How can I query additional fields outside of the Apache Cassandra partition key?"

SAI implements efficient indexes based on a table’s columns, such as parts of a composite partition key. Before SAI, you could index clustering keys, but you could not index parts of a composite partition. The development of SAI was inspired by SASI to achieve the goal of efficient and simpler filtering via the creation of secondary indexes.

SAI also makes data modeling easier because you do not need to create custom tables just to cater to particular query patterns. You can create a table that is most natural for you, write to just that table, and query it any way you want.

SAI makes it possible to define multiple indexes on the same database table. Each SAI index can be based on any column in the table. Exception: there is no need to define an SAI index based on the partition key when it’s comprised of only one column; in this case, SAI issues an invalid query message. You can also define an SAI index using a single column in the table’s composite partition key. A composite partition key means that the partition is based on two or more columns. In this case with an SAI index, you would specify just one of the columns that comprises the composite partition key.

For developers, SAI removes several previous pain points, including the need to duplicate denormalized data to query non-PrimaryKey columns.

For operators, SAI has several advantages, including the use of significantly less disk space for indexing; fewer failure points; easier uptime due to the simplified architecture of SAI; and fewer copies of data to secure.

SAI is not an enterprise search engine. While it does provide some of the same functionality, SAI is not a complete replacement for text-based search. At its core, SAI is a filtering engine, and simplifies data modeling and client applications that would otherwise rely heavily on maintaining multiple query-specific tables.

SAI is an index, not a search engine. Unlike the text-based search, SAI has no need for schema management. SAI configuration is simpler and is tuned with existing database parameters, such as in cassandra.yaml. With SAI, there is no commit log to accept writes during bootstrap; SAI does not need to wait for bootstrap to read the database configuration. With SAI, schema/indexing options reside in the index metadata, which is handled by native database schema management.

Storage-Attached Indexing has queries are entirely CQL-based. The features, by design, are intentionally simple and easy to use.

At a high level, SAI indexes are:

Define each SAI index on any table column. Exception: there is no need to define an SAI index based on the partition key when it’s comprised of only one column; in this case, SAI issues an invalid query message.

You can also define an SAI index using a single column in the table’s composite partition key. A composite partition key means that the partition is based on two or more columns. In this case with an SAI index, you would specify just one of the columns that comprises the composite partition key.

With collection maps, you can define one or more SAI indexes on the same column, specifying keys, values, and entries as map types. SAI also supports list and set collections.

See Virtual tables and Virtual tables for SAI indexes and SSTables.

SAI indexes Memtables and SSTables as they are written, resolving the differences between those indexes at read time. See SAI write path and read path.

SAI supports two on-disk index formats, optimized for:

SAI requires significantly lower disk usage compared to other native or bolt-on Cassandra index solutions. SAI produces an additional 20-35% disk usage compared with unindexed data. The SAI disk usage is largely dependent on the underlying data model and the number of columns indexed.

The supported types are: ASCII, BIGINT, DATE, DECIMAL, DOUBLE, FLOAT, INET, INT, SMALLINT, TEXT, TIME, TIMESTAMP, TIMEUUID, TINYINT, UUID, VARCHAR, VARINT.

Yes — SAI supports collections of type map, list, and set. See the following topics:

For queries on tables with SAI indexes:

The unsupported query operators are:

Examples:

Use the WITH OPTIONS clause to indicate how SAI should handle case sensitivity and special characters in the index. For example, given a string column lastname:

No. There is a 1-to-1 mapping of an SAI index to a column. However, you can create a separate index on each column in a given table. Also, SAI can use multiple defined indexes within a single read query.

The SAI memory footprint is divided between the JVM heap and the Chunk Cache. The heap stores memtable indexes, and the chunk cache stores recently accessed on-disk index components as well as other SSTable components. SAI provides metrics for both the heap and the chunk cache. For each index, SAI also provides metrics for determining the size in bytes of memory used by the on-disk data structure, as well as disk usage. Refer to Index group metrics. SAI also provides Table state metrics that give you visibility into the disk usage, the percentage of disk usage of the base table, the index builds in progress, and related metrics. See Table state metrics.

There is no limit on the number of index columns that can be used in a single query. The sai_indexes_per_table_failure_threshold setting in cassandra.yaml controls the maximum number of SAI indexes allowed in a single table (10, by default). However, querying against multiple indexed columns incurs a cost that is related to the increased number of index components processed. When evaluating multiple indexed columns in a query, SAI performs a workflow (1: Traverse. 2: Merged. 3: Intersect that ultimately coalesces data from multiple memtables and SSTables.

For related information, see the match streaming and post filtering example.

The SAI write path is actually very simple. The indexes live with the data, both in memtables and SSTables. When a write is acknowledged to the client, the data is already indexed. This is a synchronous process. When the memtable is flushed, the indexes are flushed as well. See SAI write path and read path.

The on-disk index components are broken down into per-SSTable index files and per-column index files. The column indexes do not store the primary keys or tokens; instead, they store compressible row IDs. The per-SSTable index files link the row IDs from the column-indexes to their backing SSTables. This SAI design allows all column indexes within a single SSTable to share per-SSTable index files, which further helps reduce the disk footprint.

Column cardinality can affect read performance when it comes to range queries among replicas. The number of rows matching a value of a high-cardinality column, such as credit card numbers, is more likely to be isolated on very few nodes (or even isolated to one node), while the rows matching a value on a low-cardinality column are more likely to reside on numerous nodes. If a query does not specify a partition key, the Cassandra coordinator scans the token ring and group token ranges by endpoints (nodes). The coordinator then concurrently execute read commands for all participating endpoints. In the worst case where the indexed column has very high cardinality, an entire cluster scan may be required before finding a match. With low-cardinality columns, be aware that if your LIMIT is higher than the number of values in your targeted column, Cassandra has to search all replicas again before determining that the LIMIT cannot be satisfied. In this case, Cassandra returns only the number of matching results.

SAI applies post-filtering in numerous scenarios. For example, consider a simple table, and an SAI index on just one of the two non-PK columns:

Given a query such as the following:

For this query, Cassandra narrows down the search by the indexed column (col1) first, then applies post-filtering on col2. (Use the ALLOW FILTERING clause with caution.) In this scenario, no additional replica roundtrips are needed; the post filtering on col2 is carried out on the replicas themselves.

Another case were post-filtering comes into play is when constructing a query that involves more than two SAI indexes. Refer to this related FAQ about AND queries.

Yes. For example, consider a transaction_by_customer table where you have a primary key customer_id, plus static columns to contain each customer’s address, phone_number, and date_of_birth. Given a query like:

If there are 100,000 transaction_by_customer rows, because you defined those three static fields, this query runs against a table that uses significantly less disk space, as compared to an environment where writes had inserted the per-customer values (address, phone_number, date_of_birth) in every row.

When you create an SAI index based on a string column, set the normalize option to true if you want SAI to perform Unicode normalization on the column data. SAI supports Normalization Form C (NFC) Unicode. When set to true, SAI normalizes the different versions of a given Unicode character to a single version, retaining all the marks and symbols in the index. For example, SAI would change the character Å (U+212B) to Å (U+00C5). See CREATE CUSTOM INDEX.

SAI validates the column name on which an index is being defined. SAI allows alphanumeric characters and underscores only. SAI returns InvalidRequestException if you try to define an index on a column name that contains other characters, and does not create the index.

SAI supports only the Murmur3Partitioner.