Storage Engine
CommitLog
Commitlogs are an append only log of all mutations local to a Cassandra node. Any data written to Cassandra will first be written to a commit log before being written to a memtable. This provides durability in the case of unexpected shutdown. On startup, any mutations in the commit log will be applied to memtables.
All mutations write optimized by storing in commitlog segments, reducing
the number of seeks needed to write to disk. Commitlog Segments are
limited by the commitlog_segment_size option, once the size is
reached, a new commitlog segment is created. Commitlog segments can be
archived, deleted, or recycled once all its data has been flushed to
SSTables. Commitlog segments are truncated when Cassandra has written
data older than a certain point to the SSTables. Running "nodetool
drain" before stopping Cassandra will write everything in the memtables
to SSTables and remove the need to sync with the commitlogs on startup.
-
commitlog_segment_size: The default size is 32MiB, which is almost always fine, but if you are archiving commitlog segments (see commitlog_archiving.properties), then you probably want a finer granularity of archiving; 8 or 16 MiB is reasonable.commitlog_segment_sizealso determines the default value ofmax_mutation_sizein cassandra.yaml. By default, max_mutation_size is half the size ofcommitlog_segment_size.
NOTE: If max_mutation_size is set explicitly then
commitlog_segment_size must be set to at least twice the size of
max_mutation_size.
Commitlogs are an append only log of all mutations local to a Cassandra node. Any data written to Cassandra will first be written to a commit log before being written to a memtable. This provides durability in the case of unexpected shutdown. On startup, any mutations in the commit log will be applied.
-
commitlog_sync: may be either periodic or batch.-
batch: In batch mode, Cassandra won’t ack writes until the commit log has been fsynced to disk. It will wait "commitlog_sync_batch_window_in_ms" milliseconds between fsyncs. This window should be kept short because the writer threads will be unable to do extra work while waiting. You may need to increase concurrent_writes for the same reason.-
commitlog_sync_batch_window_in_ms: Time to wait between "batch" fsyncs Default Value: 2
-
-
periodic: In periodic mode, writes are immediately ack’ed, and the CommitLog is simply synced every "commitlog_sync_period" milliseconds.-
commitlog_sync_period: Time to wait between "periodic" fsyncs Default Value: 10000ms
-
-
Default Value: batch
-
NOTE: In the event of an unexpected shutdown, Cassandra can lose up to the sync period or more if the sync is delayed. If using "batch" mode, it is recommended to store commitlogs in a separate, dedicated device.*
-
commitlog_directory: This option is commented out by default When running on magnetic HDD, this should be a separate spindle than the data directories. If not set, the default directory is $CASSANDRA_HOME/data/commitlog.
-
Default Value: /var/lib/cassandra/commitlog
-
commitlog_compression: Compression to apply to the commitlog. If omitted, the commit log will be written uncompressed. LZ4, Snappy, Deflate and Zstd compressors are supported.
(Default Value: (complex option):
# - class_name: LZ4Compressor
# parameters:-
commitlog_total_space: Total space to use for commit logs on disk.
If space gets above this value, Cassandra will flush every dirty CF in the oldest segment and remove it. So a small total commitlog space will tend to cause more flush activity on less-active columnfamilies.
The default value is the smaller of 8192, and 1/4 of the total space of the commitlog volume.
Default Value: 8192MiB
Memtables
Memtables are in-memory structures where Cassandra buffers writes. In general, there is one active memtable per table. Eventually, memtables are flushed onto disk and become immutable SSTables. This can be triggered in several ways:
-
The memory usage of the memtables exceeds the configured threshold (see
memtable_cleanup_threshold) -
The
commit-logapproaches its maximum size, and forces memtable flushes in order to allow commitlog segments to be freed
Memtables may be stored entirely on-heap or partially off-heap,
depending on memtable_allocation_type.
SSTables
SSTables are the immutable data files that Cassandra uses for persisting data on disk.
As SSTables are flushed to disk from memtables or are streamed from
other nodes, Cassandra triggers compactions which combine multiple
SSTables into one. Once the new SSTable has been written, the old
SSTables can be removed.
Each SSTable is comprised of multiple components stored in separate files:
Data.db-
The actual data, i.e. the contents of rows.
Index.db-
An index from partition keys to positions in the
Data.dbfile. For wide partitions, this may also include an index to rows within a partition. Summary.db-
A sampling of (by default) every 128th entry in the
Index.dbfile. Filter.db-
A Bloom Filter of the partition keys in the SSTable.
CompressionInfo.db-
Metadata about the offsets and lengths of compression chunks in the
Data.dbfile. Statistics.db-
Stores metadata about the SSTable, including information about timestamps, tombstones, clustering keys, compaction, repair, compression, TTLs, and more.
Digest.crc32-
A CRC-32 digest of the
Data.dbfile. TOC.txt-
A plain text list of the component files for the SSTable.
Within the Data.db file, rows are organized by partition. These
partitions are sorted in token order (i.e. by a hash of the partition
key when the default partitioner, Murmur3Partition, is used). Within a
partition, rows are stored in the order of their clustering keys.
SSTables can be optionally compressed using block-based compression.
SSTable Versions
The version numbers, to date are:
Version 0
-
b (0.7.0): added version to sstable filenames
-
c (0.7.0): bloom filter component computes hashes over raw key bytes instead of strings
-
d (0.7.0): row size in data component becomes a long instead of int
-
e (0.7.0): stores undecorated keys in data and index components
-
f (0.7.0): switched bloom filter implementations in data component
-
g (0.8): tracks flushed-at context in metadata component
Version 1
-
h (1.0): tracks max client timestamp in metadata component
-
hb (1.0.3): records compression ration in metadata component
-
hc (1.0.4): records partitioner in metadata component
-
hd (1.0.10): includes row tombstones in maxtimestamp
-
he (1.1.3): includes ancestors generation in metadata component
-
hf (1.1.6): marker that replay position corresponds to 1.1.5+ millis-based id (see CASSANDRA-4782)
-
ia (1.2.0):
-
column indexes are promoted to the index file
-
records estimated histogram of deletion times in tombstones
-
bloom filter (keys and columns) upgraded to Murmur3
-
-
ib (1.2.1): tracks min client timestamp in metadata component
-
ic (1.2.5): omits per-row bloom filter of column names
Version 2
-
ja (2.0.0):
-
super columns are serialized as composites (note that there is no real format change, this is mostly a marker to know if we should expect super columns or not. We do need a major version bump however, because we should not allow streaming of super columns into this new format)
-
tracks max local deletiontime in sstable metadata
-
records bloom_filter_fp_chance in metadata component
-
remove data size and column count from data file (CASSANDRA-4180)
-
tracks max/min column values (according to comparator)
-
-
jb (2.0.1):
-
switch from crc32 to adler32 for compression checksums
-
checksum the compressed data
-
-
ka (2.1.0):
-
new Statistics.db file format
-
index summaries can be downsampled and the sampling level is persisted
-
switch uncompressed checksums to adler32
-
tracks presense of legacy (local and remote) counter shards
-
-
la (2.2.0): new file name format
-
lb (2.2.7): commit log lower bound included
